Laser Setup Assistant

FREE LASER TOOL

Laser Setup Assistant

Find a practical starting point for your laser power and speed settings. Select your laser, material, and thickness to get recommended starting settings.

Set Up Your Laser

Choose your machine and material below. These settings are starting points only and should always be tested on your own machine.

Please enter a valid laser power.

Your Starting Settings

Power 70%
Speed 3000 mm/min
Passes 1
Air Assist Recommended
Material Plywood
Thickness 3 mm
⚠️ Important: These values are starting points, not guaranteed machine settings. Laser power, lens, focus, air assist, material density, and machine condition can significantly change the result. Always run a small test before production.
FREE LASER TESTS LASER CALCULATORS MATERIAL GUIDE TROUBLESHOOTING

Laser Power and Speed Settings

Finding the right laser power and speed settings depends on your laser type, laser power, material, thickness, focus, air assist, and machine configuration. Use this free Laser Setup Assistant to get a starting point before running your own test.

For the most accurate results, test your material with a free laser test file and record your final settings.

You can also use our laser calculators to calculate kerf, slot and tab dimensions, CNC feed rates, and other useful values.

Having a Problem With Your Laser Cutter / engraving ?

How It Works?

Tell Us About Your Machine


Explain Your Problem


Our Expert Reviews It


We Reply to Your Email