ATOMSTACK Laser Engraving Machine - Cutting Master
ATOMSTACK focuses on the research and development and improvement of laser technology, and finally developed cutting masters represented by P9 M50, X7 PRO, A10 PRO, A5 M50 PRO, with high power and high precision, providing a wider range of application scenarios and more possibilities.
If you have an ATOMSTACK cutting master, you can realize your creativity, cutting master class can cut: veneer, furniture, accessories, parquet, architectural model, aviation model, switch film, advertising type and LOGO leather cut flowers, Clothing accessories, etc., ATOMSTACK laser engraving machine cutting master can also apply to a wide range of materials: bamboo, plywood, leather, fabric, cardboard, sponge, etc.
A5 SERIES
Laser machines work similarly to office printers, so the process is simple. Cutting and engraving with an Epilog is as easy as following these three steps: select your design and print, configure the laser for your material with speed and power settings, and push GO to laser it!
Engraving is Easy!
Print to your laser from any graphics software
Laser machines work similarly to office printers, so the process is simple. Cutting and engraving with an Epilog is as easy as following these three steps: select your design and print, configure the laser for your material with speed and power settings, and push GO to laser it!
Q: How long does it take to assemble?
A: 5-15 minutes (Depends on your preparation).
Q: Which engraving software is supported?
A: LaserGrbl (Free)(Win XP, Win 7, Win 8, Win 10, Win 11)
LightBurn (Paid-30 Day Free Trial)(Mac OS, Linux, Win XP, Win 7, Win 8, Win 10, Win 11)
Q: What materials can be engraved?
A: Metal, Glass, Ceramic, Wood, plastic (opaque), cloth, leather, and other materials that can be burned by laser.
Q: Can I engrave metal and stainless steel?
A: You can mark the metal after plating or spraying (acting on the coating or oxide layer), stainless steel (the effect is better after the stainless steel is painted black. Note: It is not engraving, but discoloration).
Q: How many hours can Atomstack Laser Engraving Machine work continuously?
A: 24 hours (In a well-ventilated environment).
Q: Can the laser module be replaced?
A: Yes, but the Laser Module input voltage needs to support 12V or 24V (for M100 laser module).
Q: How long is the warranty period?
A: One year warranty (We will send you the corresponding non-artificially damaged parts for free).
Q: Is it possible to engrave cylindrical surfaces?
A: Need to purchase Atomstack R3 Rotary Roller as an accessory to sculpt the cylindrical surface.
WHAT MATERIALS CAN ATOMSTACK CUT AND ENGRAVE?
can cut and engrave hundreds of laser-compatible materials! Here are some examples of the most popular materials used:
You can check this pack :
from here : www.designerooh.com
